Acrylic One-Step Roof Coating
• 100% Acrylic Elastomeric UV Resistant Coating
• Stays Flexible for Years in All Temperatures
• Easy to Apply- No Priming Required
• Dries Black
Sizes Available: 4.75 Gallon Pail, .9 Gallon Pail
Coverage: Approximately 50 Square Feet Per Gallon
Description
SealBest One-Step Roof Coating is a 100% Acrylic Coating designed to form a tough, durable rubber membrane over a variety of roof surfaces. Ideal for Commercial and Industrial applications as well as residential use. This product meets ASTM D6083 (Remains flexible down to -15 degrees).
Uses
A variety of roof surfaces including Asphalt, Concrete, Wood, EPDM, APP, SBS, Mobile Homes, RV's, Polyurethane Foam, and more.
Directions
Clean Surface - Sweep off all dirt, dust, and debris. Remove rust, mildew, oil, grease, or other foreign material on the surface. Allow freshly applied asphalt roofs to cure a minimum of 4 weeks prior to applying this coating. Scrub roof with SealBest Concentrated Roof Cleaner or bleach solution (1 part chlorine bleach and 3 parts water). Rinse thoroughly and allow to dry.
EPDM Roofs - When coating EPDM roofs it is extremely important to remove all dust, dirt, and embedded clay to assure proper adhesion. Thoroughly scrub roof surface with SealBest Concentrated Roof Cleaner or bleach solution (1 part chlorine bleach and 3 parts water) and pressure wash entire roof surface. Use a wide tip on pressure washer to prevent tearing roof material. Allow surface to dry.
Applying Roof Coating - Stir pail thoroughly. Do not dilute. For best results apply Acrylic One-Step Coating with a soft brush, 3/4” nap paint roller, or high pressure sprayer. For optimum performance, durability and warranty purposes, apply a second coat.
|
